4.6 Recommendations
A
microprocessor-based digital data acquisition system should be used as the
primary data recording system; analog data recording systems may be used as
a backup. Wind speed and wind direction analog recording systems should
employ continuous-trace strip-charts; other variables may be recorded on
multi point charts. The analog charts used for backup should provide
adequate resolution to achieve the system accuracies recommended in Section
5.1. Estimates of means should be based on at least 60 samples (one sample
per minute for an hourly mean ).
Estimates
of the variance should be based on at least 360 samples (six samples per
minute for an hourly variance). If single-pass processing is used to
calculate the mean scalar wind
direction then the output from the wind vane should be sampled at least once
per second.
4. METEOROLOGICAL DATA RECORDING
4.1 Signal Conditioning
4.2 Recording Mechanisms
4.3 Analog-to-Digital Conversion
4.4 Data Communication
4.5 Sampling Rates
4.6 Recommendations